If you use a hydraulic breaker, you need a custom built HydrauliCircuit Technology 5-gallon breaker Autolube system. You will quickly recover the cost of the Autolube system with extended working tool and bushing life. Even if you grease your breaker manually as often as the manufacturer recommends (usually every two hours), most of the grease liquefies and runs out within the first few minutes of operation. Our engineered Autolube systems inject small quantities of grease continuously during breaker operation only, resulting in a properly lubricated breaker. Overall grease consumption is significantly reduced compared to manual greasing, plus you don’t have to wonder if the breaker was lubricated or not. Grease output is infinitely adjustable, which allows the Autolube system to be used on small, medium and large breakers.

Also, included with the Autolube system, is our exclusive “Warning Sensor” unit, which allows you to choose between an audible warning signal, or shutdown of the breaker operation, when the grease is depleted. Switching between the two options is very simple. All systems come complete with hoses, fittings, clamps, mounting components, and detailed installation instructions.

Hydraulic Pump

• For Larger Excavators
• 5 Gallon Capacity
• Infinitely Adjustable Output
• Includes Low Level/ Shut Down Warning Sensor.

Electric Pump

• Popular for Smaller Excavators and Tractor Loader Backhoes
• Offered in two sizes – 1 gallon and 2 gallon.
• Clear reservoir helps easily monitor grease level.
• Grease output is dependant on number of elements.  One element is standard.
• Grease output relief prevents excess pressure build up in system.
• Reservoir can be filled in bulk or with gun.
• Includes Low level sensor with audible signal.

• 24 V DC
• Standard on Excavators